Non-perforated Radiant Barrier | 17″ x 235′ = 333sf

Description

Our Non-perforated Radiant Barrier is a solid, non-permeable vapor barrier which will stop the transmission of water vapor through the material. This product is suitable for norther climates where plastic vapor barriers are typically installed on the inside of the insulation in a structure. This nonpermeable product should not be used in attics, but may be used on the under side of ceiling joist in norther locations where vapor barriers are used extensively. Please be advised, installing a vapor barrier at the wrong location in a wall, roof or ceiling assembly may cause condensation and/or water damage inside the assembly.

Our Radiant Barrier materials are Class A/Class 1 fire rated, block over 95% of radiant heat energy, and are 100% made in the USA. Unlike conventional radiant barrier products, Ra-flect Radiant Barrier is manufactured using a Vapor Phase deposition technology resulting in a stronger, more durable and longer-lasting radiant barrier for commercial and residential use. Ra-flect radiant barrier is put through extensive quality control tests before it leaves our facility. From in house reflectivity, permeability and tear strength tests, to the use of electron microscopes to verify that the Aluminum coating is thick enough to prevent the radiant barrier from corroding over time or from oxidizing in water. If a long lasting, strong, durable radiant barrier is what you are looking for, then look no further and place your order below.